Enterprise DDR5 32GB 5600MHz ECC Registered RDIMM Server Memory
Capacity: 32GB
Type: DDR5 RDIMM ECC
Speed: 5600MHz (PC5-44800)
Voltage: 1.1V
Application: Server, 5G BBU, data center, industrial equipment
PRODUCTS
Showing 1–16 of 303 resultsSorted by latest
-
-
Enterprise DDR5 16GB 5600MHz ECC Registered RDIMM Server Memory
Capacity: 16GB
Type: DDR5 RDIMM ECC
Speed: 5600MHz (PC5-44800)
Voltage: 1.1V
Application: Server, 5G BBU, high-performance equipment
-
Enterprise DDR4 32GB 3200MHz ECC Registered RDIMM Server Memory
Capacity: 32GB
Type: DDR4 RDIMM ECC
Speed: 3200MHz (PC4-25600)
Voltage: 1.2V
Application: Server, data center, communication equipment
-
Enterprise DDR4 16GB 3200MHz ECC Registered RDIMM Server Memory
Capacity: 16GB
Type: DDR4 RDIMM ECC
Speed: 3200MHz (PC4-25600)
Voltage: 1.2V
Application: Server, 4G/5G BBU, industrial equipmen
-
Enterprise DDR4 8GB 2666MHz ECC Registered RDIMM Server Memory
Capacity: 8GB
Type: DDR4 RDIMM ECC
Speed: 2666MHz (PC4-21300)
Voltage: 1.2V
Application: Server, 4G BBU, industrial PC
-
CICT Mobile GSP3410S GNSS Simulator
Support BDS/GPS/GLONASS/Galileo system full-frequency point open service signals, a single device to support any combination of frequency point signal output;
High degree of equipment integration, all analog signal simulation is controlled by a simulation software, support for simulation mode and test mode two modes of operation;
With carrier trajectory model simulation function, support external loading motion model file for trajectory simulation;
With active timing and passive timing function, support internal frequency scale and external frequency scale automatic switching function;
With signal open/close automatic control function, each channel can specify the signal to be closed for a certain period of time for a few seconds after opening, supporting the receiver to lose lock recapture test;
Simulation control software display function, real-time display of user attitude, simulation time, user information, star view, navigation status and simulation operation log information.
-
CICT Mobile CTP3308EV Telematics LTE-V2X Comprehensive Tester
Support List test mode, and chip cooperation, further enhance the efficiency of production test;
Fully automatic PC5 signal T/RX test, CW and LTE signals can be used for frequency and power calibration, and support 10MHz & 20MHz receive sensitivity test;
With 8 RF COM interfaces, interface visualization, can be independent dual-channel test;
For some modules launched in the market, CTP3308EV can realize one-key automation test, which provides a powerful cooperation platform support and perfect end-to-end solution, laying a foundation for the industrialization of Telematics;
Realize C-V2X to do AP layer network, security, message layer protocol conformance testing and laboratory V2V\V2I scenario simulation.
-
CICT Mobile SSA5010 C-V2X Sweep Analyzer
Support background test data reporting, including: test location latitude and longitude, altitude, PC5 signal field strength, signal-to-noise ratio, channel occupancy, channel busy rate, received signal strength indication, delay information and other information;
Spectrum scanning, spectrum scanning with 100M bandwidth, to assist in analyzing the anti-interference performance of V2X signals in the field;
Leading domestic C-V2X outfield test solution, simultaneously supporting 4-span and new 4-span equipment testing;
Supports multipath and Doppler testing, providing data support for channel modeling;
With spectrum scanning function to assist interference detection and problem localization;
Customized test service solutions and analysis reports for customers.
-
CICT Mobile Terminal signaling synthesizer CTP3515
Has 8 RF ports and supports 8T4R;
With 0.4~6GHz RF capability;
Supporting 400MHz analysis bandwidth;
Supporting 5G SA and NSA network architecture;
Supporting multi-cells;
Support conduction and OTA testing;
Supporting flexible setting of L1/L2/L3/NAS parameters;
Supporting monitoring of key indicators such as Tput, bler, RB and MCS;
Supporting multi-user services and simulating the real environment of 5G commercial network;
Supporting DL 4×4 MIMO, UL 2×2 MIMO;
Supporting automated use case testing and management;
Support mmV evolution, support NR V2X evolution.
-
CICT Mobile Terminal Production Synthesizer 3308F
Cellular and non-cellular one-stop testing;
Support 5G NR, LTE (including LTE-Cat1), WCDMA, CDMA2000, TD-SCDMA, GSM, NB-IoT, StarFlash New Short Range, WIFI (a/b/g/n/ac/ax), Bluetooth (4.0/4.2/5.0), GPS, Beidou;
Support MultiChannel to improve the efficiency of meter trial;
Faster test speed, higher test accuracy;
Downstream 8 ports support broadcasting;
1U architecture, 6.5kg, convenient for production line stacking;
Size: 351(W)*44(H)*388(D)mm;
Built-in multiple cooling fans for better heat dissipation treatment and high tolerance to ambient temperature.
-
CICT Mobile Terminal Production Synthesizer 3308E
Expandable universal platform supporting TDD-LTE, FDD-LTE, Cat1, NB-IoT, WCDMA, TD-SCDMA, CDMA2000, GSM, Bluetooth, WIFI, GPS and other communication standards;
Dual-channel parallel testing, can parallel tor 2 terminals at the same time;
Fast measurement characteristics;
Support including ping-pong testing, support for one tow four, improve production testing efficiency;
GPIB/LAN remote control;
Covering a variety of chips such as Qualcomm, MTK, Hesi, Spreadtrum, ASR, Hengxuan and so on.
-
CICT Mobile Terminal R&D + Production IMD 3308C
Scalable and versatile platform supporting TDD-LTE, FDD-LTE, WCDMA, TD-SCDMA, GSM and other communication standards;
Dual-channel parallel testing;
System emulator for each standard and built-in fading channel emulator;
Extensive and fast inter-cell switching test;
Optional automation software;
Fast measurement features;
Support for one-stop testing of multiple terminals including ping-pong testing;
GPIB/LAN remote control;
Covering a wide range of chips such as Qualcomm, MTK, Hesi, Spreadtrum, ASR and others.
-
CICT Mobile CTP3500
A single meter can support NR TDD two-cell and FDD four-cell;
Support meter cascade, the maximum can support TDD four cells;
Supporting upstream and downstream peak throughput test, supporting 256QAM;
Support upstream and downstream carrier aggregation;
Supports R15 and R16 protocol versions, and supports smooth evolution of subsequent versions;
Support 450 MHz – 6000 MHz FR1 frequency range, can support 100MHz continuous bandwidth of single carrier at any starting point in the band;
Extendable to support 400 MHz continuous bandwidth of single carrier at any starting point within the NR FR2 frequency band;
Support terminal OTA test;
Support automated execution of use cases and judgment of results;
Support customized development of test cases.
-
CICT Mobile Mining explosion-proof and intrinsically safe signal converter
Support 5G N1/N28/N78/N79 frequency band;
Rated input AC voltage is: AC127V (75%~110%), 1.5A, overall power consumption: ≤15W;
Overall dimensions (L*W*H): 448mm x 424mm x 200mm;
Weight: ≤40kg;
Mining explosion-proof and intrinsically safe type, explosion-proof mark is Ex d [ib] I Mb.
-
CICT Mobile 5G Vehicle-to-Ground Communication TAU Product (DT-5130)
Supports 5G NR n1,n2,n3,n5,n7,n8,n12,n20,n25,n28,n40,n41,n66,n71,n77,n78,n79;
Support 4T4R, transmit power 23dBm or 33dBm;
Support External antenna, N-type female*4; 10/100/1000M adaptive, Qty 4, M12-A type connector; 1 channel, external, push-pop USIM card slot; 1 channel, built-in USIM chip; (choose one of the two); Built-in TF card interface, Qty 1; Built-in mSATA, Qty 1;
RS232 1 channel, external; RS485/422 1 channel, external;
DC 110V, M12-D type connector; Maximum power consumption ≤ 20W;
EMC in line with “Railway facilities . Electromagnetic compatibility . Part 3-1: Railway Vehicles . Trains and complete vehicles” requirements of the EN 50121-2017 standard;
Vibration Conforms to IEC 61373-2010 standard as required by “Shock Vibration Test for Rolling Stock Equipment in Railway Facilities”;
Environment Conformity with EN 50155-2017 as required by “Railway installations Electronic equipment for railroad vehicles”;
Fire protection Conforms to EN 45545-2 as required by “Fire protection of railroad vehicles – Part 2 Fire requirements for materials and components”.
-
CICT Mobile 5G-R vehicle-mounted wireless digital transmission terminal product (DT-5120)
Support 5G-R band, channel number 1T2R/2T2R, maximum transmit power 33dBm;
Support GSM-R frequency band, the number of channels 1T1R , the maximum transmit power 25dBm;
Support 5G-R/GSM-R band, external antenna SMA type female 3; 10/100/1000M adaptive, number 2, professional aviation plug connector; 1 channel built-in USIM chip; built-in mSATA;
DC 110V;
Operating temperature -20-70℃.